Products List
Electrolytic tinning line
This method of surface tretment preserve and ensure the long service life of the products.
HIGHLIGHTSThe line produces very high quality tin-plate in wide format to supply stamping lines for beverage cans production. It runs at very high speed (up to 650 m/min at entry/exit section) and...
1250mm Eletrogalvanizing line
width:600-1250mm
thickness:0.15-1.2mm
raw material:annealed rolled strip
type of zinc layer:zincification
quality:GB156775
1250mm Electrogalvanizing lineElectro-galvanizing line is to put the coils which is cold rolled and annealed into electro galvanizing addembly,after washing and...
700mm Eletrogalvanizing line
width:600-1250mm
thickness:0.15-1.2mm
raw material:annealed rolled strip
type of zinc layer:zincification
quality:GB156775
Electro galvanized production lineElectro-galvanizing line is to put the coils which is cold rolled and annealed into electro galvanizing addembly,after...
Strip Steel Continuous Electrolytic Tinning Line
electrolytic tinning line:
material:MR,D,L
thickness:0.18-0.55mm
width:300-1250mm
soeed:60-300m/min
strip steel continuous electrolytic tinning line Tin plate has a glittery surface, excellent weldability, high resistant to corrosion, smooth sparyability and flexible...
Hot Strip Cut to Length Line
cut to length line:
width:900-2000mm
thickness:1.5-16mm
weight:max.32t,sheet length:1000-16000mm,speed:60m/min
hot strip cut to length lineOur customer expect the sheets produced on the hot strip cut to length line to exhibit excellent flatness and minimal stress.The automated...
slitting line
slitting lineCharacteristic Features:
1.high automatic level to achieve high economic efficiency
2.minimum burr on strip edges
slitting lineSlitting lines have the capability to meet client's demand for minimum burr,no damage to the surface,high production capacity etc. to the...
Cut to Length Line
The slitting line is used to shear the steel stripinto required narrow strips, high speed, hydraulic tension shear, PLC control
General Introduction Cross cutting line is applied to shear the strip to certain length along transverse direction. It is composed of pay-off...
Cross Cutting Line
The slitting line is used to shear the steel stripinto required narrow strips, high speed, hydraulic tension shear, PLC control
General Introduction Cross cutting line is applied to shear the strip to certain length along transverse direction. It is composed of pay-off...
1450mm Cut to length line
cut to length line:
material:carbon steel,low alloy steel
thickness:0.2-2.0mm
width:600-1350mm
weight:max.25t
coil Cut to length line 1.Technical Parameter of the cutting line:MaterialThicknessWidthWeightCutting LengthLine speedCarbon steel, high-quality carbon steel, and...
Slitting Line
The slitting line is used to shear the steel stripinto required narrow strips, high speed, hydraulic tension shear, PLC control
General Introduction This slitting line is used for peel the coil, level and then cut to narrow strips. PLC control enables it to cut easily...